---------- > From: Joe & Penny Goss <imatunr@primenet.com> > To: pianotech@ptg.org; MPT <MPT@talklist.com> > Cc: pianotech@ptg.org > Subject: Re: Wegman grand info needed > Date: Wednesday, October 07, 1998 6:36 PM > > Richard, > Be sure to check and see if there is a pin block in this piano!!!!!!!! No > kidding if my memory serves me correctly the pins are only about 1 1/4 " > long and are held in a cast iron plate by friction. They are something else > to tune as you need to think of the friction vectors of the tuning pin. > Joe Goss Thanks Joe, Now promise not to call my client and tell them what you know that I don't ..... :) Ric duhDumb > > > > Dear list. > > > A lady called me and said her pins were loose and could I fix them. >
This PTG archive page provided courtesy of Moy Piano Service, LLC