Charles Walters Console

[Joe & Penny Goss]

Hi Jon,
You might consider using an impact tuning hammer or impact style tech i.e..
loose on the pin.
Also if the pins are also loose CA will ease the sticky pin if it was
caused from pin tightner
Joe Goss
----------
> From: YouthPage8@AOL.COM
> To: pianotech@ptg.org
> Subject: Charles Walters Console
> Date: Saturday, October 17, 1998 5:38 PM
> 
> Yesterday I tuned a late 70's Walters Console.  Tuning the pins in the
tenor
> section wasn't so bad, but I have never tuned a piano with such jumpy
pins in
> the high treble.  I didn't do a job that is characteristic of my usual
work-
> so I am going back in a few days to try and do a better job.  I also had
a
> similar problem (not quite as bad) with a 70's Baldwin Acrosonic spinet
> shortly after I started tuning.  Any advice would be greatly appreciated.
> 
> Jonathan Hoover