>I have a SAT II and today I need to use it in order to tune a piano in >442cps. >The piano was out of tune about 64 cps flat. >I read the FACs with 8 cps up without problems but when I started tuning it >I saw that the 8 cps wasn't on the page where I put the FACs because the >display did not show to me + as the manual says. >( I did everything as on page 18 of the manual - offsetting an FAC tuning >to non-standard pitch.) >There are some better method in order to tune a piano in 442 as this one >that I worked today ? >ROGERIO CUNHA IC MEMBER OF THE GUILD It's in there Rogerio. The page where you stored the information doesn't display the + sign. It mathematically offsets each note by the +8 cents in the page. Keith McGavern kam544@earthlink.net Registered Piano Technician Oklahoma Chapter 731 Piano Technicians Guild USA
This PTG archive page provided courtesy of Moy Piano Service, LLC