Charles and list, There is an article and drawings of a jig for thinning grand hammer shanks in the reprint book entitled "Hammers and Touch Weight. The article is from the July 1988 PTJ. Terry Beckingham PTG Associate At 08:29 AM 10/30/98 EST, you wrote: > If people are doing this, I would very much like to know how. What kind of > tools, jigs, whatever are you using to get professional looking results. If > there is a journal article, a reference would be great. > > TIA, > > Charles Farinella > c_farinella@conknet.com >> > > >I did it once on an older Steinway. The original shanks were much thinner than >the new ones. I didn't do anything fancy, and perhaps the end results didn't >look proffessional, but it did the job. I used a dremmel tool with the round >hammer shaping drums, and sanded off the sides of the shanks. > >Willem Blees > >
This PTG archive page provided courtesy of Moy Piano Service, LLC