Friends: On Monday I replaced my first set of the doughnut-shaped grommets on the sticker wires of a Baldwin Acrosonic spinet. I believe it was Jim Harvey (?) who said something he wanted to try sometime was cutting the grommet to get it on the wire and be careful to position the cut at the back of the fork. So I tried one, but I don't recommend it. It was time-consuming to see that the position was correct. And, if you ever have to remove the action in the future, you will be a very unhappy camper, having to line up all those cuts again when otherwise you can easily push them off or on. I also decided against removing the wires at the bottom to slide the grommets on. It just looked like I was asking for trouble. All things considered, I liked it best just taking off the nuts and felt washers to get the new ones on. Thought this might be of use to someone. Clyde Hollinger
This PTG archive page provided courtesy of Moy Piano Service, LLC