Hi Wim, What is PC7 and where do you get it? James Grebe R.P.T. of the P.T.G Creator of Handsome Hardwood Caster Cups and Practical Piano Peripherals in St. Louis, MO -----Original Message----- From: Wimblees@AOL.COM <Wimblees@AOL.COM> To: pianotech@ptg.org <pianotech@ptg.org> Date: Thursday, September 24, 1998 9:58 AM Subject: Re: query >In a message dated 98-09-23 22:00:02 EDT, you write: > ><< Hi All, > Today I looked at a bad bass bridge. The upper 1/3 of the bridge pins have > split the wood and opened the wood. What is the better repair Fiberglas or > epoxy? > Thanks > James Grebe >> > > >Jim: > >I have used super glue in cases like this. Remove the strings, squirt the >super glue in and around the crack, making sure the pins are in place, and >within five minutes, you can put the strings back on and tune thee piano. > >If you think the crack is too wide for super glue, try using PC7. It will >require a second trip, but it is a very good repair. > >Wim >
This PTG archive page provided courtesy of Moy Piano Service, LLC