>Ed said: >>... it sure is quicker to put the stack on and off >>with half the screws than it is to take all those >>weights on and off. > >MUCH FASTER, since the actual weight that is going to be on each key IS on >it when you're doing the leveling, it's far more accurate than any other >method, so... you have less work to do in the long run. >Diane This is definitely true as long as the keyarms will rise above the balance rail pins without difficulty to remove and install the key punchings and shims. There are times when they won't, hence other measures must be taken. Keith McGavern kam544@flash.net Registered Piano Technician Oklahoma Chapter 731 Piano Technicians Guild USA
This PTG archive page provided courtesy of Moy Piano Service, LLC