Hi Ed, I am certainly glad that you asked this question. I have been unsatisfied with all the methods I have used. 1) The thick washer to build it out. 2) Using a router. 3) Using a hammer and chisel. 4) Using a power file. 5) Resorting to plate casters. My next try,was going to be a 3 1/2" hole saw. I am eagerly awaiting the other solutions. Regards, John M. Ross ----- Original Message ----- From: <A440A@AOL.COM> To: <pianotech@ptg.org> Sent: Thursday, December 09, 1999 5:25 PM Subject: Re: Enlarging Castor Recesses > > << What is/are your favorite methods/tool(s) for enlarging the recess that > castors fit into on the bottom of pianos such as when fitting double > wheel castors so the arm of the castor doesn't get hung up against the > existing recess? >> > > Greetings, > Forstner bits, drill press, strap clamps. > regards, > Ed Foote >
This PTG archive page provided courtesy of Moy Piano Service, LLC