John.. Try plugging the original holes with a dowel that fits snugly. Then use a bit of the correct size to make a new bigger hole. Dick Helena MT ----- Original Message ----- From: John R Fortiner <pianoserv440@juno.com> To: <pianotech@ptg.org> Sent: Thursday, December 09, 1999 1:38 PM Subject: Enlarging Castor Recesses > What is/are your favorite methods/tool(s) for enlarging the recess that > castors fit into on the bottom of pianos such as when fitting double > wheel castors so the arm of the castor doesn't get hung up against the > existing recess? > I've used chisels and rotary files chucked into a drill for this - bad > wording - I never chucked the chisels into a drill :-), but feel there > has to be a better way. > > John Fortiner > Billings, MT. > ___________________________________________________________________ > Why pay more to get Web access? > Try Juno for FREE -- then it's just $9.95/month if you act NOW! > Get your free software today: http://dl.www.juno.com/dynoget/tagj. >
This PTG archive page provided courtesy of Moy Piano Service, LLC