Who or what is "Pianophile"? David Ilvedson, RPT > Pianophile's pins are Japenese, and I have found them to be very good. > I have ground down the sides of the tip of my wire cutters to form a flush > cut, it works better than my expensive centre pin cutters. > Do things in order e.g. remove all flange pins ream all bushings ect. > Hope this helps > Roger > > > > > At 09:46 PM 10/02/99 -0600, you wrote: > >Hi, > > > >Does anyone know a source of supply for pre cut and tumbled center pins? I > >am going to be doing a *lot* of repinning very shortly on a piano and feel > >that these pins would be the *very best* option for the client. > >Regards, > >Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. > > > >Tuner for the Saskatchewan Centre of the Arts > > > >drose@dlcwest.com > >http://www.dlcwest.com/~drose/ > >3004 Grant Rd. > >REGINA, SK > >S4S 5G7 > >306-352-3620 or 1-888-29t-uner > > > Roger Jolly > Baldwin Yamaha Piano Centre > Saskatoon and Regina > Saskatchewan, Canada. > 306-665-0213 > Fax 652-0505 > > > > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC