In a message dated 3/8/99 9:27:33 PM !!!First Boot!!!, lawsonic@global.co.za writes: << Well today, had an upright with a real loose pin knocked in as far as possible. Not having paid attention to previous threads on CA glue (super glue to me). I did it for the hell of it: I took out the pin and with my little 3gm tube smeared the pin with the glue, let it dry then tapped it back in and it was surprising tight. Main question - is technique correct? Yes or No answers in lines of 20 or less please. Brian Lawson >> If it worked, the technique is right. If it doesn't, you made a mistake. Willem
This PTG archive page provided courtesy of Moy Piano Service, LLC