-----Original Message----- From: JIMRPT@AOL.COM [SMTP:JIMRPT@AOL.COM] Sent: Monday, March 08, 1999 9:35 PM To: pianotech@ptg.org Subject: Re: Best way In a message dated 3/8/99 10:27:08 PM, you wrote: <<"Any advice on how to cut full sheet key top material? What do you use to cut it? Pyrallin material?">> Just score it with a sharp knife and it will snap apart, the deeper the scoring the easier and cleaner the snap line. Use a straight edge to keep the score lines straight. Jim Bryant (FL) 7:00am 3/9/99 Lonnie Young I cut sheets of pyrallin with an old paper cutter, the type with the large lever with a knife attached and it worked great. Lonnie Young University of Southern Miss
This PTG archive page provided courtesy of Moy Piano Service, LLC