---------------------- multipart/alternative attachment Last one. This is the receiver board removed and modified. I have removed the original wiring and speaker and solder on new connections. The red and white go to the battery. The Black and green by-pass directly from the RF circuit and go to the SAT. There are two additional wires not included here that go to the LED light which comes on to verify that the unit is receiving the signal. [Image] ---------------------- multipart/alternative attachment --------------5ED8F8782A76E6296726BCC7 An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/40/15/bd/ba/attachment.htm --------------5ED8F8782A76E6296726BCC7 A non-text attachment was scrubbed... Name: C:\\windows\\TEMP\\nsmailIT.jpeg Type: image/jpeg Size: 16404 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/3b/1e/6d/cd/nsmailIT.jpeg --------------5ED8F8782A76E6296726BCC7-- ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC