Convention hints?

[Joe & Penny Goss]

Ron,
This did not come from the convention but from my buying an old techs
supplies. Walt Spencer was his name.
For the thinner punchings he had a very simple way to get the correct paper
punching out of the plastic case that held the punchings in seperate
compartments.
The inside lid had a sheet of felt glued to the top so that when the lid was
opened the felt drew off the punchings so that the top now held a few single
punchings.To get more all one needs to do is close the lid and turn it ovet
so that the lid can pick up more punchings. Turn back and open and there
they are easy to pick up.
Joe Goss

----- Original Message -----
From: Ron Koval <drwoodwind@hotmail.com>
To: <pianotech@ptg.org>
Sent: Friday, July 14, 2000 6:13 AM
Subject: Convention hints?


> Now that a lot of you are back from the convention, how about sharing your
> favorite 'new' (or newly remembered old) hint, tip, or technique from
> Arlington?  Come on all you lurkers out there, jump in and give those of
us
> 'left home' a little taste of the convention!
>
> thanx!
>
> Ron Koval
>
> Chicagoland
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>