Doug;
Here are 38 points, but there are more. I interspersed Joe G's answers with
mine.
Jim Bryant (FL)
--------------
1. Dip
1.a. Aftertouch (jb)
2. Front rail bushing.
2.a. Front rail friction (JG)
3. Key height.
3.a. Key spacing (jb)
4. Balance rail bushing.
4.a. Balance rail friction (JG)
4.b. Key squaring (jb)
4.c. Key level(jb)
5. Key end felt. Not on all keys. OK, I slipped this one in.
6. Backcheck
6.a. Rake (jb)
6.b. Height (jb)
6.c. Squareness (jb)
7. Capstan
8. Wippen flange friction.
9. Let-off.
10. Repetition spring tension
11. Repetition lever height.
12. Jack spacing fore and aft.
13. Jack sideways spacing.
14. Balancier flange friction.
15. Jack flange friction.
16. Hammer height.
17. Hammer drop.
18. Hammer spacing.
18.a. Repetition lever spacing (jb)
18.b. Hammer flange bushing friction (JG)
18.c. Hammer traveling (jb)
18.d. Hammer straightening {burning} (jb)
19. String spacing.
19.a. Add string leveling with my level<G>(JG)
19.b. Termination point seating (JG)
19.c. Hammer to string mateing (JG)
20. Tuning pin adjustment (JG)
20.a. Coil tightness (jb)
20.b. Level pins (jb)
This PTG archive page provided courtesy of Moy Piano Service, LLC