>I'd like to pull on your coats about something... > >I'm regulating an action from a Baldwin grand and have run into a rather odd >situation with the rep. spring. If I set the hop to a nice positive lift, >the hammer shank will fall when I trip the jack with my finger. If I set the >spring to support the shank after tripping the jack, the hop has a serious >kick. This condition is throughout the action. > >Any ideas?... Check the pinning of the repetition lever. Sounds like it might be too loose. Try re-pinning a sample lever a bit tighter and see if this solves your problem. Let us know how it comes out. Tom Tom Seay School of Music The University of Texas at Austin mailto:t.seay@mail.utexas.edu
This PTG archive page provided courtesy of Moy Piano Service, LLC