hypo-type oilers

[Richard Moody]

Hi Terry,
    Recently I discovered the hypo oiler hypo part works very well in one of
those liquour sample bottles.  They should have the plastic caps.  Unscrew
the plastic cap, screw in the hypo oiler needle and cap.    When done
replace with the origial cap and I gurantee nothing will leak from these
bottles.  By using the square ones Jim Beam for example they won't roll
around and there is a little more flex (than in the round ones) so you can
control the squirt.    The Moody Dripolator works even better in these
bottles.  While the hyo caps fit the sample bottles, the sample caps do not
seal the hypo bottles.

----- Original Message -----
From: piano lover88 <pianolover88@hotmail.com>
To: <pianotech@ptg.org>
Sent: Sunday, October 22, 2000 1:25 PM
Subject: hypo-type oilers


> Does anyone know if the "valvespout" hypo oiler, like the kind in the
Schaff
> catalog,(pg. 45), or something similar, is available in stores?
>sometimes my protek and other fluids
> leak out of the standard type hypo-oilers, even though they have a cap>
Thanks!
>
> Terry Peterson
> Associate Member PTG
> Los Angeles, CA
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>