accelerator bottle

[Joe & Penny Goss]

Newton,
I keep the little plug that comes with the bottle inserted in the tube to
keep the activator from leaking out.
Each time that the activator is used I remove the plug and replace when
through.
Makes a bottle last a hole lot longer.
Also I very seldom use the spray as it uses too much. A pencil, screw driver
or the tube with the plug still in will deliver just a drop where needed.
Joe Goss
----- Original Message -----
From: Newton Hunt <nhunt@jagat.com>
To: <pianotech@ptg.org>
Sent: Saturday, September 02, 2000 12:37 PM
Subject: Re: accelerator bottle


> Accelerator bottles are plastic and will expand from the
> pressure pumped into the bottle to push the stuff out.  If
> you wish real control transfer the stuff to a glass bottle
> that will accept the pump.  I hate the plastic bottle but
> have had to live with them.
>
> Newton
>