Actually, this is exactly the problem with a Cline (Young Chang), and exactly the solution suggested by Phil Glenn, the head technician for Young Chang, who has had occasion to deal with a number of these situations. Paul S. Larudee, RPT Richard Brekne wrote: > Say there Roger... I was wondering... this shrinking process thingy... I run > into a few pianos that have seemingly snug enough centers / bushings... but the > bushing cloth used is like really soft and bushy.. you can burnish the hell out > of this stuff without getting it "pressed to stay". Not wanting to have to > completely replace the set of flanges, or get into rebushing.. would it work to > "shrink" them, and then re pin ??
This PTG archive page provided courtesy of Moy Piano Service, LLC