Plate Bushings

[Farrell]

Ditto for me too! Definately!
Terry Farrell
Piano Tuning & Service
Tampa, Florida
mfarrel2@tampabay.rr.com

----- Original Message ----- 
From: "Newton Hunt" <nhunt@jagat.com>
To: <pianotech@ptg.org>
Sent: Thursday, September 07, 2000 9:19 AM
Subject: Re: Plate Bushings


> > 
> > I could even send a drawing of the jig that I use on my drill press and
> > on the bandsaw and would be glad to do so if that is what you want.
> > 
> Thank you John I would love to see the basic idea.  I do
> have a bandsaw and a drill press.  The drill press was the
> first power tool I bought.  It is a Sears Crapsman and I
> have lived to long regret that purchase but over the years I
> have got it to do what I need to do.  The basic problem is
> runout but I have solved that by keeping the quill lock snug
> and the quill well lubricated.
> 
> I am rarely successful in drilling a hole consistently in
> the center of a dowel so I would love to see you jig for
> doing so.
> 
> Oh, by the way, I do know everything, but it keeps falling
> out of my basket and gets lost.
> 
> Newton
>