Thanks Barrie. Yes it does help. The "Partent metallic screw tuning pin form 1862 to about 1897". Do you mean "Patent"? The word "PATENT" was cast/stamped into the forward edge of the steel/iron piece that covered the tuning pin area. I would suppose this is the feature that had the tuning pins actually threaded through the metal plate. "Drilled bridges similar to agraffes from1841". That does not sound like what this piano had. This one had brass agraffes - totally modern in appearance - with round bases that appeared to screw into the metal pinblock plate. Do you agree that thi piano is most likely from the 1870s? And like no way from the 1820s? Terry Farrell Piano Tuning & Service Tampa, Florida mfarrel2@tampabay.rr.com ----- Original Message ----- From: "Barrie Heaton" <Piano@forte.airtime.co.uk> To: <pianotech@ptg.org> Sent: Saturday, September 09, 2000 8:19 PM Subject: Re: Broadwood Dating > Hi Terry, > > This is a list of 7'6" Broadwood grands up to 1900 > > 7'6" length 3'10 wide 6 octave F to F Boudoir Grand (trichord) 1832 > [*] > 7'6" length 3'10 wide 6 octave F to F Bicorda 1835 /36 [*] > 7'6" length 4'4" wide 6.5 octave C to G Bicorda 1849 > 7'6" length 4'4" wide 6.3/4 octave C to A Royal 1861 > 7'6" length 4'4" wide 6.3/4 octave C to A Royal Boudoir 1862 > > [*] Six octaves C to C and F to F complete iron frame from 1890 only > on a few models. > > Partent metallic screw tuning pin form 1862 to about 1897 > Drilled bridges similar to agraffes from1841 > > Hope this is of some help > > Barrie, > -- > Barrie Heaton Ý The U.K. Piano Page © > http://www.a440.co.uk Ý http://www.uk-piano.org/ > PGP Key on request Ý Home to the UK Piano Industry > > > Terry Farrell Piano Tuning & Service Tampa, Florida mfarrel2@tampabay.rr.com
This PTG archive page provided courtesy of Moy Piano Service, LLC