Terry, The only "real" fix...Is to rebush! It takes about 10 minutes, but lasts. ( and you don't have to wait "over night"!) You end up with a clean bushing, and no problems.....maybe for the next tech.....50 years from now! Bob Moffatt Calgary, Alberta Canada ----- Original Message ----- From: Roger Jolly <baldyam@sk.sympatico.ca> To: <pianotech@ptg.org> Sent: Sunday, September 24, 2000 4:02 PM Subject: Re: Rebush Damper Guide Rail > >Hi Terry, > Two fixes come to mind. 1. heat the end of the damper wire > with a Bic Lighter then burnish the bushing with the hot wire. 2. Wet the > bushing with 50% alcohol and water, install an over sized bridge pin in the > bushing over night. It will size the bushing about 002" oversize. > Regards Roger > Roger Jolly > Saskatoon, Canada. > 306-665-0213 > Fax 652-0505 >
This PTG archive page provided courtesy of Moy Piano Service, LLC