Gordon Does Heli-Coil (spelling) make a repair kit for this size? I've used several for other stripped thread repairs with excellent result. Check out auto supply houses. Paul Chick ----- Original Message ----- From: <PNOTNR@AOL.COM> To: <pianotech@ptg.org> Sent: Monday, September 25, 2000 7:32 PM Subject: Re: Agraffe Trouble > In a message dated 9/25/00 9:15:28 PM !!!First Boot!!!, > jformsma@dixie-net.com writes: > > << There is a tech I know of who uses JB Weld to fill up the hole, allowing it > to dry overnight, then drilling and tapping. >> > > Thanks John, > > I had thought that might be a possibility. Just wondering whether there > might be a better method. I tried a 1/4" agraffe, and it seems to grab the > threads a little when it's turned almost down to the plate. Maybe JB Weld > would make it just that much more secure. > > Gordon Large, RPT > Maine >
This PTG archive page provided courtesy of Moy Piano Service, LLC