Crack fillers - old soundboards

[jolly roger]

---------------------- multipart/alternative attachment

>
>
> I method I've used is to tape the crack on the board surface, the tape needs
> to be
> tight across the crack and not concave.  Invert the piano and apply epoxy
> from the 'bottom'.
> This gives a level surface and you don't have to worry too much about
> shrinkage.
>
> Regards,
> Jon Page,   piano technician


Hi Jon,
            I use the same system, only I use PVC electrical tape, the epoxy
will not wick into it, and it can be stretched for a very flushed joint. No
clean up on the top side.
Regards Roger

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/6f/18/94/c5/attachment.htm

---------------------- multipart/alternative attachment--