At 08:06 AM 1/5/2001 -0500, Terry wrote: >If you see boards cracking again right next to the shim, my guess is that >either it was not glued in properly, board was not dried properly, or board >was not glued back to the ribs at the crack properly. Also, I can get real Or... a brand new shim made from fresh improperly dried wood was used. Cut shims from old boards instead. They're already dry. John John Musselwhite, RPT - Calgary, Alberta Canada http://www.musselwhite.com http://canadianpianopage.com/calgary email: john@musselwhite.com http://www.mp3.com/fatbottom
This PTG archive page provided courtesy of Moy Piano Service, LLC