Brian, Get the tool for that from Yamaha. It works and I've used it for years. Has a slim "shank" to get past those wood regulating buttons. Believe me, it's definitely worth it! Avery At 05:29 PM 01/12/01 -0500, you wrote: >How's that for a topic line! > >Seriously, I ran into this a couple of times within the last couple of >weeks. > >Baldwin grands... needed to adjust the jack in the window so that it would >sit in the proper place under the knuckle, not too far front or back, that >is... you know, the little set screw on the front of the jack... > >On these little buggers, the hammer flange rail comes way down in front of >the regulating screws, and it's a real pain trying to adjust these things. >I was able to do it, but it wasn't all that easy. I can imagine with some >trepidation the process of setting the whole line of 88. > >Any little secrets anyone has up their sleeve? other than a large bottle of >'happy pills'? <grin> > >Inquiring minds just had to ask... > >Thanks, > >Brian Trout >Quarryville, PA >btrout@desupernet.net >
This PTG archive page provided courtesy of Moy Piano Service, LLC