loose bridge pins/false beats

[Joe & Penny Goss]

Hi Howard,
To me the amount of string rendering at the bridge ( if the piano is at
pitch ) is so small as to not cause any problems.

Joe Goss
imatunr@primenet.com
http://www.primenet.com/~imatunr/

----- bridge pins/false beats


> <!--StartFragment-->Both CA glue and epoxy can be used to effect a
permanent
> repair. My choice
> would be CA glue, which if applied carefully can be done without removing
> the string. Use the thinest CA glue.
>
>
> If you apply CA to a loose bridge pin without removing the string, even
with
> the utmost care, won't some of the liquid wick around and glue the string
to
> the pin causing some rendering problems? I've never done this so I'm using
> my imagination as this topic does interest me.
>
> Howard S. Rosen, RPTHi Howard,