Plain Wire Tie around

[Joe & Penny Goss]

Hi,
That reminds me.
I drilled a small hole in the Spurlock lid prop and added a small screw
beside it to make this string end knot.
Joe Goss
imatunr@primenet.com
http://www.primenet.com/~imatunr/

----- Original Message -----
From: <Douglasmahard@AOL.COM>
To: <pianotech@ptg.org>
Sent: Saturday, January 20, 2001 5:29 AM
Subject: Re: Plain Wire Tie around


> In a message dated 01/19/2001 5:10:28 PM Eastern Standard Time,
A440A@AOL.COM
> writes:
>
> << <<How does one make a nice hitch pin loop in the field?>>
>   >>
> Hi Rook,
> Besides the responses you received already check out the PACE booklet on
> repairs. Starting on page twenty Bill Spurlock describes a simple little
> dowel jig to use. I carry one with me and it works great every time.
>
> Good twisting.
>
> Doug Mahard
>