John Hartman... filling bridge pin holes (new thread)

[jolly roger]

Hi Brian, 
              I have had good results with maple shoe pegs and thin epoxy.
It drills with out fouling the drill bits.
It's usually a couple od days before I around to drilling and notching, so
every thing is really cured.
Roger


At 07:22 PM 1/28/01 -0500, you wrote:
>Hi John,
>
>I'm curious about something.  There have been a couple of posts that
>mentioned filling the old bridge pin holes in the old bridge body.  I'm
>curious as to what you use?
>