---------------------- multipart/alternative attachment In a message dated 7/3/01 1:44:11 AM Central Daylight Time, baldyam@sk.sympatico.ca writes: > Hi Wim, > There is always the option to drill out the hole and plug, use > epoxy to secure. Bin thar' done dat', and 10yrs later it is still working > fine. > Regards Roger. > > Roger That will fix the problem with the pin that has the most oil in it. The problem, as Tom said, is that the oil is getting to the other holes. So unless you drill out all the pins in a two or three note areas, the oil will never go away, and infect the other pins. But your idea is a good one. Willem ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/50/aa/a5/dd/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC