---------------------- multipart/alternative attachment In a message dated 7/23/01 2:58:30 PM Central Daylight Time, mfarrel2@tampabay.rr.com writes: > I have blow distance set at a short 1-3/4" (I would certainly prefer to not > make it any shorter - this dead-as-a-doornail piano needs all the hammer > power it can get!), and everything regulates out real nice so that I end up > with 3/8" dip with 0.025" aftertouch. I am solving the problem for now by > raising the hammer rest rail just enough so that the shanks don't click > against the metal piece, but that makes the hammers rest right on the rest > rail - but it seems better than the clicking. Any ideas would be > appreciated. > > Terry Farrell > > > Terry I have had the same problem, and your solution seems to be the only one. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/bc/8b/56/27/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC