Ed Would a controlled "squeeze" in a smooth jawed vise do the same thing? Paul Chick ----- Original Message ----- From: <A440A@AOL.COM> To: <pianotech@ptg.org> Sent: Thursday, March 08, 2001 10:07 AM Subject: Re: key leads > > <<The diameter of the hole is 9/16". Supply > houses that I know provide either a 1/2" or 5/8" lead. Anybody know where I > can get the midsize. >> > > Greetings, > I think you will need to swedge a 1/2" lead to fit. I just put them on a > vise-top and whack them with a hammer, they swell out round and with a little > practise, you can swedge them so that they are a light press fit. > Good luck, > Ed Foote RPT >
This PTG archive page provided courtesy of Moy Piano Service, LLC