key leads

[Richard Brekne]

Grin... ok.. I can deal with that. You shouldnt have any trouble finding the
right leads.

David Love wrote:

> Dear Inquisitors:
>
> The initial post is as printed.  The down weight is high because a lead from
> the original leading pattern was removed.  The upweight and downweight will
> be fine if I replace the missing lead.  The customer does not wish to spend
> the money to redesign the action.  He simply wants the action returned to
> its original form by replacing the missing leads.
> The only issue at this point is whether I can find a 9/16" lead as
> originally came out of the piano, or whether I will have to expand a 1/2"
> lead to fit the hole.
>
> David Love
>

--
Richard Brekne
RPT, N.P.T.F.
Bergen, Norway
mailto:Richard.Brekne@grieg.uib.no