Hi all: This is my second request as I did not receive any input the last time around. I need to replace wippens in an old Chickering Grand. The wippens are of the sort where the bushing for the wippen flange is in the wippen - not in the flange...kind of similar to the standard hammer flange assembly. The wippen flanges are the flat brass ones similar to the billings flanges. Anyone have a source for these things?...or suggestions about adapting a modern wippen to this situation? Schaff and APSCO do not have these available. Renner does not appear as though they will be of much assistance however I do have a call in to Rick Baldassin. I would especially apperciate any advice from our resident sages such as Ron or Del. . Thanks - Matt Wynne, Suffolk, NY chapter
This PTG archive page provided courtesy of Moy Piano Service, LLC