Hi guys and gals... ran into this like odd ball thingamagibby today...was wondering if anyone knew about this or ran into something like this before. A Knight piano... number 31662. From about C6 or so down for almost the entire length of the treble bridge there was this mahogany strip about an inch wide and perhaps 2 mils thick at the thickest glued to the soundboard just above the bridge. What is this all about ? Obviously a factory job. Piano has hardly been touched inside.. Owners say its been tuned.... once...grin. What is this some kind of a mass increase deal... and what kind of reasoning would the factory have had for glueing this thing in. Looked like it was kind of an afterthought thingy... like it was put on after the panel was finished. very curious. -- Richard Brekne RPT, N.P.T.F. Bergen, Norway mailto:Richard.Brekne@grieg.uib.no
This PTG archive page provided courtesy of Moy Piano Service, LLC