I have seen this in many Knight pianos, Richard, and wondered myself what the reason is. Sorry I don't have any answers! Stephen Stephen Powell Auckland, NZ >A Knight piano... number 31662. From about C6 or so down for >almost the entire length of the treble bridge there was this >mahogany strip about an inch wide and perhaps 2 mils thick at the >thickest glued to the soundboard just above the bridge. What is >this all about ? Obviously a factory job. > >What is this some kind of a mass increase deal... and what kind >of reasoning would the factory have had for glueing this thing >in. Looked like it was kind of an afterthought thingy... like it >was put on after the panel was finished. >Richard Brekne >RPT, N.P.T.F. >Bergen, Norway
This PTG archive page provided courtesy of Moy Piano Service, LLC