Micrometers

[Richard Wolff]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Thanks to you and everyone else for all of the helpful micrometer =
information.
  ----- Original Message -----=20
  From: Kevin E. Ramsey=20
  To: pianotech@ptg.org=20
  Sent: Sunday, March 18, 2001 6:03 PM
  Subject: Re: Micrometers


  Richard, you may find this hard to believe, but I don't use a =
micrometer at all. I carry a stainless steel dial caliper which reads in =
thousands. It's quicker, and I use it for more than just wire, as it can =
be used as a depth gauge, and an inside diameter gauge too. Mine cost me =
$27 US. One of the best tools I regularly use.
    ----- Original Message -----=20
    From: Richard Wolff=20
    To: pianotech@ptg.org=20
    Sent: Saturday, March 17, 2001 4:59 PM
    Subject: Micrometers


    Any opinions on what micrometer to purchase for general purposes, =
such as string measurements?

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d2/5d/a9/d7/attachment.htm

---------------------- multipart/alternative attachment--