Hi, I use the SATlll for the last 2 octaves for tuning the unisons. I find it easier, and I have not had a single customer complain, and they still get me back. I go back over by ear, and sometimes I will find a unison has slipped, but that is not the machines fault, since it is just one string of the three. The odd time I will increase or decrease the stretch. Regards, John M. Ross Windsor, Nova Scotia, Canada piano.tech@ns.sympatico.ca ----- Original Message ----- From: "Richard Brekne" <Richard.Brekne@grieg.uib.no> To: <pianotech@ptg.org> Sent: Tuesday, March 20, 2001 4:24 PM Subject: ETD Unisons was something else > We were getting into something interesting here that I wouldnt mind seeing continued. I > am wondering about different ETD users experience and preferences concerning how to > best use an ETD for aid in tuning unisons. Where and when you choose to do unisons with > ETD help, and what works best for you and why. > > Tom Cole wrote: > > > Don, > > > > On a quality piano, I will frequently tune the individual strings with > > an ETD, single mute style, letting the machine do the grunt work, and > > then putting on the final polish with the ear. Listening to (and > > "looking at") each string separately gives me some clues as to how I > > will go back over the unison aurally (if necessary). > > > > I'll leave it to others to figure out how to prevent those strings from "coupling". > > I've tried bundling boards and they're way too thick! ;-) > > > > Tom Cole > > > > -- > Richard Brekne > RPT, N.P.T.F. > Bergen, Norway > mailto:Richard.Brekne@grieg.uib.no > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC