Excellent! Thank you David. I have read all your articles several times. Somehow missed lodging that into my memory bank cell(s). So much information......so few brain cells left. I will do exactly that when my inquisitive mind wants to know. Terry Farrell Piano Tuning & Service Tampa, Florida mfarrel2@tampabay.rr.com ----- Original Message ----- From: "David Stanwood" <dstanwood@hotmail.com> To: <pianotech@ptg.org> Sent: Monday, April 30, 2001 7:04 PM Subject: Re: Key Pin Friction - was Heavy Playing S&S C > > > Farrel writes: > > >And then how do techs evaluate key pin friction? I have never seen anything > >in print regarding any definitive procedures to evaluate key pin friction. > > Terry, > > I published the method in the PTG Journal in my atricle: > > "Standard Protocols of the New Touchweight Metrology" > PTG Journal February 2000 > > Excerpt: > > "The new measurement called Key Friction Weight (KF) tells us precisely how > much of the Friction Weight is from the key bushings. Place the key on the > front weight jig and follow the protocol for measuring negative Front Weight > (FW). With the key on the jig, place temporary weights on top of the key > and slide them back and forth until a position is found that makes the Front > Weight (FW) zero. Then, without disturbing the position of the temporary > weights, place the key back on the key frame and push the back of the key > down onto the back rail cloth. Then find the minimum amount of weight placed > on the front of the key at the Measuring Point that causes the key to drop > (Fig 8). Another way is to place the key on the frame and attach a key > leveling lead to hold the back of the key down. Then measure Up Weight and > Down Weight (with stack off) and apply the formula (DownWt - UpWt)/2. The > value found is Key Friction Weight (KF)." > > Newton... taking three grams off the strike weight takes it down and out of > the concert weight (High) zone.... I would not recommend that although it > will make the action feel better after taking out loads of lead.... > > Tone is the primary concern... touch is secondary. In nice pianos both are > nice.... > > David Stanwood > > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com >
This PTG archive page provided courtesy of Moy Piano Service, LLC