Fw: RC PB laminations

[Erwinpiano]

  Hi Terry

 flat sawn! not rotary cut.

 Dale Erwin


----- Original Message -----
From: "Ron Nossaman" <RNossaman@KSCABLE.com>
To: <pianotech@ptg.org>
Sent: Friday, May 04, 2001 4:32 AM
Subject: Re: RC PB laminations


> >Ooops! Did I boo-boo? Are the Schaff standard cheepie pinblocks not
rotary
> >cut?
> >
> >Terry Farrell
>
> Nope. I had assumed so to, but take a look at the end grain of the
laminations.
>
> Ron N