At 11:32 PM 5/6/01 -0700, you wrote: >Bought one of these at that price. Still trying to figure out how it works. >There were no tips that would fit over a tuning pin, so I'll probably have >to have a special one made. So much for bargains. :-( I suspect, after >checking the Danair website, that I should have bought on of those! >Regards, >Joe Garrett >----- Original Message ----- >From: "Carl Meyer" <cmpiano@home.com> >To: <pianotech@ptg.org> >Sent: Sunday, May 06, 2001 8:01 PM >Subject: Re: Air Hammer > > > > > > Murphy's law strikes again!!! Whenever you buy something, it always is on > > sale somewhere else cheaper!!!! > > > > Oh well. It's only money, > > > > Carl Meyer > > > > ----- Original Message ----- > > From: Ron Lindquist <ronli@newnorth.net> > > To: <pianotech@ptg.org> > > Sent: Sunday, May 06, 2001 7:25 AM > > Subject: Air Hammer > > > > > > > Harbor Freight Tools has a nice one on sale for $49.95--I got one when > > they > > > were $79. > > > <harborfreight.com> or 800-423-2567. > > > > > I use the tip for the 60 penny nail and fits good. Just got another catalog and there now $39.95 + shipping but that is free if you order $50 worth of stuff. Have used the nailer for building a lot and it is still going strong and they include a O ring rebuild kit with it.
This PTG archive page provided courtesy of Moy Piano Service, LLC