Fallboard Inlay Cleaning

[Larry]

I have used a fine polishing compound such as Mohawk Poly-Buf, extra fine, 
applied with cheese cloth.  This is also useful for polishing scratches in 
polyester finishes.  Because you have a satin finish, you may need to go 
over the area with some fine steel wool/wax after.


At 09:04 PM 5/14/2001, you wrote:
>Those small litte cotton-coverd sticks that you are supposed to clean your
>ears with, works great combined with some copperpolish (not silverpolish).
>
> > Does anyone have a safe method for polishing the brass inlay lettering of
>a
> > Yamaha fallboard, without harming the surrounding finish?
> >
> > I've tried Cory buffbrite, but that did nothing.
> >
> > It's a satin, lacquer finish.
> >
> > Many thanks!
> >
> > John Piesik, RPT
> > Oceanside, CA
> > jpiesik@arinc.com
> >