Wayne, Sears #44644, 3/8" drive, Inch Pounds/Newton Meters. You'll need an adapter 3/8" to 1/4" to fit the socket of the tuning pin tip from APSCO. Regards, Joe Garrett, R.P.T. ----- Original Message ----- From: "Wayne Hohle" <wayne.hohle@sympatico.ca> To: <pianotech@ptg.org> Sent: Wednesday, May 23, 2001 9:43 AM Subject: Re:torque wrench,where. > > can anyone tell me where to source a3/8 drive torque wrnch to check > tuning pens? > where and how much would i expect to spend > > thanks > > wayne >
This PTG archive page provided courtesy of Moy Piano Service, LLC