Jim I can't tell you why the subject came up, but I do know the tech who mentioned it to the dealer and will ask him about it and let you know. Paul Chick ----- Original Message ----- From: <JIMRPT@AOL.COM> To: <pianotech@ptg.org> Sent: Wednesday, May 23, 2001 9:14 AM Subject: Re: Kawai pin block to plate flange > > In a message dated 5/23/2001 9:25:20 AM, Paul C. wrote: > > <<"............... Kawai grands on his floor. 3 were checked, two new and one > KG 2 about 10 yrs old. All had an "air gap" of about .010-.020" almost to > entire length of the block. ......................">> > Not atypical at all on many brands. > > <<"A local technician brought this to his attention and we're now wondering > if this a concern.">> > Hmmm........ would be interesting to know why the subject came up to begin > with? >
This PTG archive page provided courtesy of Moy Piano Service, LLC