Consider boring your own hammers... David *********** REPLY SEPARATOR *********** On 5/29/01 at 12:21 AM Isaac OLEG SIMANOT wrote: >Richard, > >You wrote : > >"When Renner agreed to meet the Hamburg Steinway specifications...they got >their contract back." > >Nice story, Richard, thank you > >I am wondering what are these specifications, and if they evolve often. > >2 months ago I ordered a hammer set for a 20 years old S&S mod B, and >received hammers with a slant very different, something that could me glued >in a mod D. >The core wood was different too, and so was the felt, the hole ,and the >weight of course. > >SO what serves to give the piano number and receive hammers, when glued, >that end with the striking point 3 mm too far (toward the keyboard)? > >Thanks to all your responses concerning the nailer. It is not sure I have >the choice here in France, as this tool is not really common. > >Isaac OLEG >PianoTech >19 rue Jules Ferry >94400 VITRY sur SEINE > >tel : 033 01 47 18 06 98 >fax : 033 01 47 18 06 90 >cell: 06 60 42 58 77 e
This PTG archive page provided courtesy of Moy Piano Service, LLC