---------------------- multipart/alternative attachment At 06:26 PM 10/19/2001 -0500, you wrote: >Hello Clyde, > >My fix for this situation is to raise the damper upstop rail, lift the >dampers on each side of the one with a loose lead weight, push the weight >back into place and then squeeze it with the pliers called shank knurling >pliers. They will spread the lead weight without touching the wood of the >damper underlever. These pliers are on page 22 of the Schaff tool catalog >part # 291. It is a quick and permanent fix. > >Norm Barrett >Memphis chapter Roger Jolly has a tool for swedging these leads. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage2001@mediaone.net http://www.stanwoodpiano.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f5/c0/e5/be/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC