This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment You shouldn't use water as a rubbing lubricant for waterbased lacquer = because it can penetrate and soften the surface. Use the recommended = rubbing oil. A good waterborne should not be "water sensitive", i.e., = doesn't show rings under a wet vase. Avoiding steel wool on waterbornes is a good idea for one reason: if = you have to spray over it, the tiny invisible steel "hairs" will be = trapped between coats and will rust. This creates a visual effect most = find objectionable. If you know for sure you're not going to spray = over, then steel wool is fine. Scotchbrite pads work well and there is = no risk of rust. Orange peel can be tough if the nature of waterborne resin keeps it from = "flowing out" as it dries. PianoLac has been designed to be extremely = thick so you can spray vertically without sagging or dripping, and yet = flows out without orange peel. It builds very fast and wet sands = easily. Arthur Grudko, PianoLac ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/01/17/7c/cd/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC