Quality Control--the long answer

[jolly roger]

---------------------- multipart/alternative attachment

>
> Well, again I ramble, so will close.... 
>   
> Del 
>  Hi Del, A good post on what really happens.   I might add that  factory
Jigs
> and Templates have a way of wearing out in use.   Nobody is made responsible
> for checking them, untill there is a problem reported from the field,
before
> you know it, a critical element is way off tolerence.  And possibly hundreds
> of nightmare pianos get out of the system.
> Kelly plates and some of the Baldwin made hammers is a classic example.
>
> Most of the workers have no understanding of what they are fitting
together, 
> they are just doing as instructed.
>
> Just my 2c worth.
> Roger

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/28/a9/cb/53/attachment.htm

---------------------- multipart/alternative attachment--