too stiff

[David Love]

Can't imagine that is cheaper or better than replacing parts.

David Love


----- Original Message -----
From: "Norman Barrett" <nbarrett@midsouth.rr.com>
To: <pianotech@ptg.org>
Sent: September 20, 2001 9:39 PM
Subject: Re: too stiff


> Flame suit is on already. I believe that a permanent solution would be to
> remove the felt bushings, sand off the birdseyes to fit and install teflon
> bushings. Labor intensive but cheaper than complete parts replacement. The
> contamination in the wood would not travel through the teflon bushing and
> problem solved. Teflon bushings properly fitted are very stable so would
> work for a long time.
>
> Norm Barrett
> Memphis Chapter
>
> ----- Original Message -----
> From: "Erwinpiano" <Erwinpiano@email.msn.com>
> To: <pianotech@ptg.org>
> Sent: Thursday, September 20, 2001 10:31 PM
> Subject: Re: too stiff
>
>
> > Hi David
> >
>