Quieting Grand Action Noise

[jolly roger]

Hi Don,
           Ops I thought the topic was wippen cloth.
Balance rail holes, steam works fine if the bushing cloth is in good
condition.  It will not last long if the bushing condition allows to key to
wobble all over the place.  This will put quite a bit of unwanted leverage
on the hole.
A temporary field fix can be effected by springing the BR pin forward, and
out of the worn cup.

Regards Roger


At 09:03 PM 9/26/01 -0600, you wrote:
>Hi Roger,
>
>Very difficult to hot press balance rail holes. *grin*
>
>At 07:21 PM 09/26/2001 -0500, you wrote:
>>At 05:31 PM 9/26/01 -0600, you wrote:
>>>Hi Laura,
>>>
>>>I agree steam can be useful in some areas. However, I am finding it is a
>>>temporary fix, atleast where I live possibly due to our very low humidity
>>>in winter (4% R.H.)
>>>
>>>
>>Hi Don,
>>             We have found that if you firmly dry iron after the steam,
>>the results are much longer lasting.
>>Regards Roger.
>>
>>
>>
>
>Regards,
>Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T.
>
>mailto:drose@dlcwest.com
>http://donrose.xoasis.com/
>
>3004 Grant Rd.
>REGINA, SK
>S4S 5G7
>306-352-3620 or 1-888-29t-uner
>